GLAPOR Cellular Glass Boards
GLAPOR cellular glass boards are the answer to a plastic-free and CO2 optimized insulation concept. Non combustible, water- and vaportight, high compressive strength: GLAPOR delivers lifetime characterisitcs for sustainable planings. Our usecases are wide spread and are also found in engineering and lightweight, loadbearing projects. Please feel free to contact us for your assistance:
Send EMAIL to GLAPOR team
GLAPOR Advantages
Specifications
- GLAPOR insulation board PG 600.3
- GLAPOR insulation board PG 900.3
- GLAPOR insulation board PG 1600
GLAPOR boards : Technical specifications
- Insulation for flatroofs
- Interior insulation of ceilings and walls
- Insulation under screed
- Insulation for facade constructions
- Perimeter insulation of walls (Basements)
- Perimeter insulation of slabs (Basements / Foundations)
| Properties | Value | Test standard |
|---|---|---|
| Composition | 100% high quality recycled glass | |
| Colour | anthracite | |
| Bulk density ± 10 % | 130 kg/m³ | EN 1602 |
| Thermal conductivity λ D | 0,052 W/(mK) | EN12667 / EN 12939 |
| Compressive stress | 600 kPa | EN 13167 |
| Fireclass | Euroclass A1 | EN 13501-1 |
- Insulation for flat roofs
- Interior insulation of ceilings and walls
- Insulation under screed
- Insulation for facade constructions
- Perimeter insulation of walls (Basements)
- Perimeter insulation of slabs (Basements / Foundations)
| Properties | Value | Test standard |
|---|---|---|
| Composition | 100% high quality recycled glass | |
| Colour | anthracite | |
| Bulk density ± 10 % | 135 kg/m³ | EN 1602 |
| Thermal conductivity λ D | 0,052 W/mK | EN 12667 / EN 12939 |
| Compressive stress | 900 kPa | EN 13167 |
| Fire behaviour | Euroclass A1 | EN 13501-1 |
- Perimeter insulation of heavy load bearing foundationslabs
- Insulation for flatroofings / parking decks
- Insulation of walls
- Loadbearing applications
| Properties | Value | Test standard |
|---|---|---|
| Composition | 100% high quality recycling glass | |
| Colour | anthracite | |
| Bulk density ± 10 % | 135 kg/m³ | EN 1602 |
| Thermal conductivity λ D | 0,058 W/mK | EN 12667 / EN 12939 |
| Compression stress | 1600 kPa | EN 13167 |
| Fire behaviour | Euroclass A1 | EN 13501-1 |
Accessories
Polymer modified hot bitumen adhesive with an application temperature from 150 °C to 180 °C
Is a two component, polymer modified and free of solvent cold adhesive- and coating material for cellular glass boards. Suitable for gluing cellular glass boards on concrete-, mansory and woodpanel boards and cellular glass boards on each other. Only for usecases in the soil - not for upper areas with UV contact.
One for all: GLAPOR TX 2K is a two component, polymer modified, bitumen free and free of solvent cold adhesive- and coating material for cellular glass boards. Suitable for bonding of cellular glass boards on concrete-, masonry surface, woodpanel boards and cellular glass boards on esach other. GLAPOR TX 2K provides also the opportuinity to create a fully reliable waterproofing. Perfect for basements and basepoints. GLAPOR TX 2K can be used for any GLAPOR application.
Consists of tapered cellular glass boards in combination with flat boards. Manufactured for you to fit in nearly every flatroofing situation.
Standard gradients:
1,0%; 1,7%; 2,0%;2,5%;3,3%, 5%
Tapered construction for two dimensional draining.
Wedge for use in bituminous sealing systems.
GLAPOR gradient boards for sloped flatroofing solutions.
Stainless steel holder for additional mechanical installation of cellular glass boards.
